
AXIS F8212 Trim Ring. sold in packs of 10. enables AXIS F1005-E/F1035-E Sensor Units and AXIS P1214-E/P1224-E Network Cameras to be recessed mounted and easily secured on a glass. plastic or metal panel. For AXIS F1005-E. the thickness of the panel should not exceed 11.5 mm (7/16 in.). For AXIS F1035-E/P1214-E/P1224-E. the thickness of the panel should not be more than 8.5 mm (5/16 in.). The cover ring’s diameter is 4.5 cm (1 3/4 in.).
AXIS7331021050198
Best Price: £116.10 from PcNova.co.uk
| Stockist | Price | |
|---|---|---|
| £116.10 | Visit Store | |
| £139.32 | Visit Store |
Viewing protector that makes it harder to see where the camera is aiming. For use when the camera is installed without dome
Designed for fixed dome cameras. AXIS T91H61 Wall Mount accommodates and safely protects accessories inside the mount. Connect to power and data quickly and easily with the built-in RJ45 cable and connection. Designed to be impact- and weather-resistant....
Pendant kit to enable use of Axis mounting products featuring a 1.5" NPS thread. 3/4" pipes can also be used. but then a nut for the pipe thread is required.
Conduit back box for 1/2" or M20 pipes. Features the 1/2" ACI interface to enable use of ACI adapters. There is an integrated female tripod thread for use of standard camera stands or holders.
The outdoor and indoor. AXIS T91B51 Ceiling Mount is ideal where a PTZ dome or a fixed dome camera needs to be installed in low ceilings or in roof overhangs. If a longer length is needed. two optional extension pipes are available. 30 cm (12 in) and...
The powder-coated aluminum AXIS T94R01B Corner Bracket is used for attaching the wall mount of Axis’ camera housing to the outer corners of a building. AXIS T94R01B Corner Bracket is also compatible with AXIS T91E61 Wall Mount for fixed dome cameras....
Accessory black or white casing for selected AXIS M32 and P32 outdoor cameras. Pre-assembled with anti-loss screws. 4pcs bulk pack.
AXIS F92A01 Height Strip Housing for mounting of compatible sensor units near building exits. The sensor unit is mounted in the housing at a height of 170 cm in the metric model and 5.5 ft. in the imperial version as measured from the ground up and positioned...